Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Hollywood Homeowners Choose Lennox Air Duct Cleaning
We provide independent Lennox air duct cleaning service in Hollywood, working on the equipment you actually own: Merit and Elite series air handlers, variable-speed blowers, and the cased coils sitting upstream of the ductwork. What makes our Lennox work different is that a cleaning visit here doubles as a diagnostic pass on the air side of the system, not a blind vacuum job. We’re an independent service provider, not affiliated with or authorized by Lennox. Call (866) 361-9843 for a free estimate.
Why Trust Hollywood Duct Cleaning for Your Lennox Air Duct Cleaning?
Our technicians have up to 14 years of experience, and on Lennox systems that experience shows up in knowing where to look first. A variable-speed air handler doesn’t fail the same way a single-speed unit does. The blower wheel loads with fine dust and lint, airflow drops, and the motor throws overcurrent faults that read like an electrical problem when the real cause is a dirty air path.
We choose parts that fit Lennox equipment properly rather than forcing a universal component into a cabinet designed around something else. When a blower assembly or cased coil has genuinely failed, we work with quality parts specified for that equipment. When the fix is cleaning, sealing, and rerouting flex runs, that’s what we do, and we don’t sell a replacement the system doesn’t need.
Warranty-safe practice matters on any Lennox install. We don’t cut corners that put a manufacturer warranty at risk: no drilling into sealed cabinets, no sealant where the manufacturer warns against it, and no modifications that change how the equipment is meant to operate. If a repair raises a warranty question, we tell you before we start. Licensed and insured, with a flat price per system agreed before work begins.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Fix in Hollywood
These are the air-side failure patterns we run into on Lennox equipment, and why each one happens:
- Loaded variable-speed blower wheels. The blower wheels in Signature Collection variable-speed air handlers collect fine dust and lint over time. As the wheel goes out of balance and airflow falls, the motor pulls higher current and can trip a fault. Homeowners often assume the motor is failing when the wheel is simply caked.
- Matted cased evaporator coils. The upstream face of an HC/CH or CX/CXC cased coil develops a blanket of lint and biofilm that no filter catches. It chokes cooling capacity long before the coil ever leaks, and in Hollywood’s humidity that blanket stays wet enough to keep growing.
- Collapsed or separated return flex. On Merit series installs, return-side flex duct runs sag, collapse, or separate at the collar. That pulls attic and garage air straight into the return, which is both an efficiency problem and an air-quality one.
- Leaking cabinet seams and blower decks. Older Lennox air handlers leak air past marginal gaskets at cabinet seams and the blower deck. Conditioned air bleeds into closets and chases instead of reaching the rooms, and unfiltered air gets drawn in.
- Disconnected flex runs after a vacant season. In Hollywood’s seasonal condos and rental units, flex runs come back disconnected or crushed when a unit sits unused, then the system is switched on full-blast into living space that hasn’t run in months.
Lennox Parts & Our Repair-vs-Replace Approach
Parts strategy on a Lennox system is straightforward. If a coil, blower assembly, or cabinet gasket has actually failed, we use parts specified for that equipment. Standard flex duct, mastic, and registers aren’t Lennox-specific, so we source those from quality aftermarket suppliers rather than pretending a brand label makes them better.
Coil cleaning, sealing, and blower cleaning are almost always worth doing on a healthy Lennox system. They address the real cause of most airflow complaints, and they cost a fraction of replacement. Replacement comes up only when a coil is corroded through or a blower motor is genuinely at end of life. We diagnose before we recommend, and we explain what we found. Call (866) 361-9843 for a free estimate and we’ll tell you which side of that line your system is on.
Our Lennox Service Process – Step by Step
- 1
Diagnosis. We open the air handler and inspect the blower wheel, the cased coil face, cabinet seams, and return collars. On variable-speed equipment we check for blower fault history and airflow readings.
- 2
Repair or install. Contact cleaning with the Rotobrush system scrubs the duct walls, Nikro extraction holds negative pressure so dislodged debris doesn’t recirculate, and Abatement Technologies equipment keeps containment tight. Coil, blower, and cabinet work happen in the same visit where possible.
- 3
Test. We verify airflow, confirm return-side leakage is sealed, and check that the system runs through its normal cycles without faulting before we pack up.
- 4
Warranty review. We walk you through before-and-after photos of your own ducts and plenum, note anything that could affect your Lennox warranty, and leave you with documentation of what was done.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Hollywood
We service and install Lennox air handlers across the Merit and Elite lines, variable-speed air handlers in the Dave Lennox Signature Collection, and the cased evaporator coils paired with them, including the HC/CH and CX/CXC families. We also service Lennox split-system and heat pump equipment, along with the filtration and duct-protection components that work with it.
As an independent provider we work with the equipment you have, not just what a dealer sells. That means cleaning, sealing, and repair on the air side of a Lennox system regardless of which line it belongs to.
We Also Service These Brands
Lennox is one part of what we see in Hollywood, so we’re not limited to a single manufacturer. We also service Trane and Carrier systems, along with the filtration and duct products from Honeywell, Aprilaire, and Guardsman that attach to them. The equipment method stays the same: contact cleaning, negative-pressure containment, and a real look at the air handler before we call the job done.
FAQs – Lennox Air Duct Cleaning Service in Hollywood
No. We’re an independent Lennox service provider and we’re not affiliated with or authorized by the manufacturer. That independence means we diagnose and repair what your system actually needs rather than steering you toward a dealer sale, and it doesn’t change the equipment-level care we bring to Lennox air handlers, blowers, and coils.
Yes. When a component on a Lennox system has failed, we use parts specified for that equipment, and for standard flex duct, mastic, and registers we source quality aftermarket products because those components aren’t Lennox-specific. We don’t claim to stock OEM parts or to be a Lennox dealer.
Most Lennox cleaning and sealing visits finish in a single appointment, with the exact time depending on how many systems, how much ductwork, and whether coil or blower work is needed. Coil and blower cleaning add time compared with a plain duct vacuum, because they’re what actually addresses airflow loss. Call (866) 361-9843 and we’ll give you a realistic window for your Hollywood property.
We cover Merit and Elite air handlers, Signature Collection variable-speed air handlers, the HC/CH and CX/CXC cased evaporator coils paired with them, and Lennox split and heat pump equipment. Our focus is the air side: ducts, plenums, coils, blowers, and the cabinet sealing around them.
Proper cleaning and sealing performed to the manufacturer’s guidance doesn’t void a warranty. We avoid modifications that would, we don’t breach sealed cabinets without reason, and we flag anything in your system that could affect warranty coverage before we touch it. If a repair raises a question, we tell you first.
Air duct cleaning in Hollywood is quoted per system rather than per vent, and the flat price is set by a written estimate before work starts, so there’s no surprise invoice once the technician is on site. Coil or blower cleaning and duct repair, if needed, are quoted separately and only after diagnosis. Call (866) 361-9843 for a free estimate.
Not always. If the cased coil face is accessible and only lightly soiled, the coil can often be cleaned in place. When the upstream face is matted with lint and biofilm, or the coil needs to come out to reach the plenum behind it, pulling it is the right call. We decide based on what we find, not a fixed script.
Variable-speed blowers spend far more time running at low speed, which means lower air velocity through the cabinet and less self-cleaning effect on the wheel. Fine dust and lint settle on the blades instead of being carried past them. Over time the wheel loads, airflow drops, and the motor pulls higher current. Cleaning the wheel restores airflow, and sealing return-side leaks keeps it from coming back as fast.
Usually both. Marginal gaskets at cabinet seams and the blower deck let conditioned air escape into closets and chases, and that same leakage draws unfiltered air in from surrounding spaces. We treat it as a sealing job on the cabinet and the return collars, done with mastic, and we check the flex runs feeding the return at the same time.
Yes. Coil and cabinet work on the air handler can be scheduled alongside the outdoor unit’s cleaning so the whole system gets attention in one visit. We’ll quote the combined work in the written estimate before anything starts.
It often does, when the fault traces back to a loaded blower wheel or restricted airflow rather than a failed motor or control board. Cleaning the wheel and coil relieves the restriction the motor is fighting. If the motor itself is at end of life, cleaning won’t fix that, and we’ll tell you so. Call (866) 361-9843 for a free estimate before you replace anything.
Why does this matter so much in Hollywood specifically? The housing stock drives the answer. Much of the city’s dominant housing type is mid-century single-story ranch homes and low-rise 1950s – 70s condos east of I-95, plus thousands of seasonal and vacation units. That makes duct work here largely a mildew-and-humidity remediation job in older, intermittently occupied systems, not the new-construction dust job it is inland. The seasonal gap is the part owners miss: a unit sits sealed and un-air-conditioned in the off-season, then gets switched on full-blast, blowing dormant growth into the living space. Hundreds of snowbird owners reopen a beachside or Intracoastal condo each fall to a musty smell, disconnected or collapsed flex runs, and duct interiors that never dried out. Year-round humidity and near-daily summer thunderstorms keep evaporator coils wet, and a Lennox coil that stays wet grows a biofilm blanket that chokes capacity. On many Lennox systems the complaint starts as weak airflow or a blower that ramps oddly, and a technician opening the air handler finds the variable-speed blower wheel caked and the cased coil face matted with lint and biofilm. The usual cause is return-side leakage combined with filtration that lets fine debris past the media, so the fix is coil and blower cleaning plus sealing the return collars and cabinet seams with mastic rather than simply vacuuming the trunk line. After that, flex runs in the attic are checked for sag or separation and repaired or rerouted as needed. Condo associations along the beach and Intracoastal often govern access to shared chases and rooftop units, so those jobs usually need association approval and coordination before we can get to the equipment.
Book Your Lennox Service in Hollywood, FL
If your Lennox system is losing airflow, running a dusty blower, or leaving a musty smell in a unit that sat closed for months, call (866) 361-9843. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Free estimate, flat price per system agreed before work starts, and before-and-after photos of your own ducts when we’re done.
Written by the team at Hollywood Duct Cleaning.